News

2016-01-12 15:21

New Jargar Superior C and G strings

The danish company Jargar has rounded the Superior strings well.

Read more …

2011-03-28 15:26

The professional journal „Ensemble Magazin for Chamber Music” assigns a CD

The “English Doric String Quartet” gets the highest appraisal from the magazine “Ensemble” for playing of three “Korngold String Quartets”.

Read more …

2011-03-28 15:20

Tips of the luthier for changing a tailpiece

If a tailpiecehanger tears or if the tailpiece does not work you can get a comprehensible instruction from the luthier how to change the tailpiece yourself.

Read more …

2011-02-04 16:40

Happy birthday Musikhochschule Lübeck

100 years Musikhochschule Lübeck. For 30 years we work on the opposite side of the college and observe particularly the development of the string players.

Read more …

2011-02-04 15:43

Violinist plays 50 hours non-stop

A Delhian musician made a new record in public performance.

Read more …

Answers

My pegs no longer hold properly. They slip and cant be turned!

It happens all the time that a peg is so tight that it can hardly be turned or they loosen and the tuning is ruined.

A well-functioning peg must fulfill several criteria:

  • It must fit properly. The holes of the peg box must be evenly formed and provide a perfect fit for the peg.
  • A peg must remain adjustable. As the peg soap is hygroscopic (it attracts moisture), the peg reacts to differences in humidity with different operating characteristics.
  • A peg needs care. A good idea is to purchase some pure curd soap (preferably old) and also regularly white chalk it.
  • Remove one string and carefully clean the peg with some alcohol but be sure to avoid any contact with the instrument's varnish.
  • Rub the peg with the soap.
  • Turn the peg several times in the peg hole.
  • The thread of the peg box should be clearly visible on the peg.
  • If this is not the case, the peg does not fit properly and should be re-fitted by a violin maker.
  • Repeat the soap rubbing and turning so often that the peg works smoothly and with ease.
  • Now apply the chalk to the contact surface of the peg and turn it repeatedly. Do this until the peg turns firmly but without bucking. Replace the string while paying attention to the incline of the bridge and proceed with the next peg in the same manner.

Detailed information and photos can be found here.

Last update on 2011-01-28 by Haat-Hedlef Uilderks.

Go back

Add a comment